破Hotspot Shield 3GB 限制

原文出自此處
http://www.mydigitallife.info/2008/06/30/fix-hotspot-shield-bandwidth-exceeded-tcp-connect-wait-auth-failure-or-daemon-start-error/


根據原文的說法, 要突破Hotspot Shield 3GB 限制, 主要還是更改的MAC(網卡卡號)設定

1. 去開始 > 控制台 > 網路連線 > 右鍵選取區域網路 > 內容
2. 在"一般tab"那裡 選取 設定 > 進階
3. 去尋找NETWORK ADDRESS , 選取右邊的VALUE , 數值放8817E890E20A > OK.


4. 去開始 > 執行 > 輸入 cmd > 然後在跳出來的命令提示元輸入
ipconfig /all
net config rdr

5. 重新啟動電腦.
(VISTA 系統請參考原文)

以下為原文
1. Go to Start -> Control Panel.
Double click on Network Connections (inside Network and Internet Connections category).
Right click on the active network connection with network adapter that you want to change the MAC address (normally Local Area Network or Wireless Network Connection) and click on Properties.
2. In the General tab, click on the Configure button.
Click on Advanced tab.
3. In the Property section, select and highlight Network Address or Locally Administered Address.
To the right, “Not Present” radio button is by default selected as value. Change the value by clicking on radio button for Value:, and then type in a new MAC address to assign to the NIC.

Note that in Windows Vista, access to NIC’s properties is from Control Panel -> Network and Internet -> Network and Sharing Center -> Manage Network Connections. Alternatively, for both Windows XP and Windows Vista, go to Device Manager and open the properties dialog of NIC from there.